
Call the World of Fax Order Hotline at 1-866-FAX-PART (1-866-329-7278) for Helpful Order Assistance!!!
CLICK HERE TO RETURN TO THE WORLD OF FAX MAIN PAGE TO VIEW ALL OF OUR PRODUCTS
COMMON ERROR CODES FOR THE:
    DCP
1000 
| CODE | DESCRIPTION | 
| (71 | Polygon motor does not synchronize with the reference clock. ) | 
| (72 | Cannot detect Beam Detect signal. ) | 
| (73 | No toner cartridge loaded. ) | 
| (74 | Toner empty. ) | 
| (75 | In-casing temperature error. ) 
      -  
       SOLUTION: REPLACE FUSER UNIT  | 
  
| (76 | Heater harness disconnected or broken. ) 
      -  
       SOLUTION: REPLACE FUSER UNIT  | 
  
| (77 | Heater thermistor short circuit.) 
      -  
       SOLUTION: REPLACE FUSER UNIT  | 
  
| (78 | Heater thermistor harness disconnected or broken. ) 
      -  
       SOLUTION: REPLACE FUSER UNIT  | 
  
| (79 | Toner thermistor harness disconnected or broken. ) 
      -  
       SOLUTION: REPLACE FUSER UNIT  | 
  
| (80 | Paper size setting error. ) | 
| (82 | Paper feeding error. ) | 
| (83 | Paper jam. The registration sensor remains ON.) | 
| (84 | Paper jam. The paper ejection sensor remains ON. ) | 
| (88 | Paper jam. Even after the registration sensor has gone OFF, the paper ejection sensor still stays OFF.) | 
| (A1 | Top cover opened. ) | 
| (A2 | Document too long to scan. ) | 
| (A3 | Document not detected by the document rear sensor. ) | 
| (A4 | 50% or more faulty of white level data. ) | 
| (A7 | One-line feeding timeout error. ) | 
| (A8 | One-line scanning timeout error. ) | 
| (A9 | Abnormal scanning reference voltage. ) | 
| (AA | Document tray opened. ) | 
| (AC | Less than 50% faulty of white level data. 1 | 
| (AE | The CCD HP sensor sticks to OFF, indicating that the CCD unit has not returned to the home position. ) | 
| (AF | The CCD HP sensor sticks to ON, indicating that the CCD unit has stayed in the home position. ) | 
| (B1 | Dark level offset data error. ) | 
| (B2 | Gain control data error. ) | 
| (B3 | Scan area left edge detection error. ) | 
| (B4 | Scan area right edge detection error. ) | 
| (B7 | A/D converter reference voltage error (at High level). ) | 
| (B8 | A/D converter reference voltage error (at Low level). ) | 
| (BA | Magnification error for substantial white level data. ) | 
| (BB | Substantial white level data error in black & white mode. ) | 
| (BC | Substantial white level data error in photo mode. ) | 
| (BD | Black level data error. ) | 
| (BE | Detection error of black mark. ) | 
| (BF | Detection error of ADF scanning position. ) | 
| (D5 | The MODEM fails to complete the command transmission sequence. ) | 
| (E4 | Out of recording paper. ) | 
| E6 | Write error in EEPROM. | 
| (E8 | Data scanning error during transmission. ) | 
| (EA | Document removed in phase B.) | 
| (F5 | EOL not found in page memory transmission mode. ) | 
| (F6 | PC interface error. ) | 
***Error codes in parentheses do not appear as a "MACHINE ERROR XX", since these errors are displayed as text messages on the LCD. These error codes may be displayed in the maintenance mode using "Function Code 82".***
FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE
RETURN TO WORLD OF FAX HOME PAGE
