World of
Fax & Copiers
Fax, Copier & Printer
Parts/Supplies Specialist
We Stock full line of parts for Sharp, Xerox, Canon, Brother, Hp, Toshiba, Panasonic, Ricoh
Outside
or within the U.S. (845) 624-2332
FAX ORDERS TO 845-624-2299
COMMON ERROR CODES FOR THE:
CODE | DESCRIPTION |
85 | Ink ribbon empty. |
87 | Fails to complete the sequence of recording operation. |
8A | Wrong or weak contact of the recording head connectors. |
8B | Recording head overheat. |
A1 | Recording paper cover opened. |
A2 | Document too long to scan. |
A4 | 50% or more faulty of white level data. * |
A5 | Faulty operation of DMAO during scanning. |
A6 | Faulty operation of DMA1 during scanning. |
A7 | One-line feeding time-out error. |
A8 | One-line scanning time-out error. |
AB | Document feed-in amount measuring error. * |
AC | Less than 50% faulty of white level data. * |
B9 | Light emission intensity error of the LED array. |
BE | Abnormal clamp PWM value |
BF | Light emission intensity error of the LED array at the setting time of initial values. * |
D5 | The MODEM fails to complete the command transmission sequence. |
D6 | No MODEM interrupt for 60 seconds. |
E6 | Write error in EEPROM. |
E8 | Data scanning error during transmission. |
F3 | Voice message recording or playing-back not started. |
F5 | EOL not found in page memory transmission mode. |
F6 | PC interface error. |
82xx | Although recording paper has been fed by 150 mm after the start of recording, the paper-edge sensor is still OFF. |
8303 | Although recording paper has been fed by 360 mm after the start of recording, the paper-edge sensor is still ON. |
8406 | Although the trailing edge of recording paper has passed out of the platen and further fed for 100 mm, the paper ejection sensor is still ON. |
8407 | Within 1 0 mm of paper feeding from when the paper ejection sensor went OFF, the sensor has come ON again. |
840C | The paper ejection sensor is ON when you turn the power on or after you open and close the recording paper cover. If the paper-edge sensor is also ON, error code 880B appears. |
8809 | Before the start of paper feeding, the paper-edge sensor is already ON. |
880A | Although recording paper has been fed by 50 mm after the start of recording, the paper ejection sensor is still OFF. |
880B | The paper-edge sensor is ON when you turn the power on or after you open and close the recording paper cover. If the paper ejection sensor is also ON, this error code appears. |
A301 | Even if a document is set, the document front sensor is OFF. |
A302 | Although a document has passed through the document front sensor, the document rear sensor is still OFF. |
A303 | When the document ejection operation has started, the document front sensor remains OFF. |
A304 | When the document ejection operation has started, the document rear sensor remains OFF. |
FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE