Call the World of Fax Order Hotline at 1-866-FAX-PART (1-866-329-7278) for Helpful Order Assistance!!!
CLICK HERE TO RETURN TO THE WORLD OF FAX MAIN PAGE TO VIEW ALL OF OUR PRODUCTS
COMMON ERROR CODES FOR THE:
MFC
1750MC
CODE | DESCRIPTION |
81 | Cam home positioning error |
82 | Recording paper feeding error |
83 | Recording paper jam. The paper edge sensor remains ON. |
84 | Recording paper jam. The paper ejection sensor remains ON. |
85 | Ribbon empty. |
87 | Fails to complete the sequence of recording operation. |
88 | Recording paper jam. Even after the paper edge sensor has come ON, the paper ejection sensor still stays OFF. |
8A | Wrong or weak contact of the recording head connectors. |
8B | Recording head overheat. |
A1 | Top cover opened. |
A2 | Document too long to scan. |
A3 | Document not detected by the document rear sensor. |
A4 | 50% or more faulty of white level data. |
A5 | Faulty operation of DMAO during scanning. |
A6 | Faulty operation of DMA1 during scanning. |
A7 | One-line feeding time-out error. |
A8 | One-line scanning time-out error. |
A9 | Abnormal scanning reference voltage. |
AB | Document feed-in amount measuring error. |
AC | Less than 50% faulty of white level data. |
B1 | CODEC LSI error. |
B8 | Amplifier gain error. |
B9 | Light emission intensity error of the LED array. |
BA | Scanning error: The Left-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected. |
BB | Scanning error: The right-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected. |
BC | Scanning error: Reduction miss. |
BD | Scanning error: Enlargement miss. |
D1 | The MODEM setup bit sticks to High. |
D2 | CTS stays OFF or ON if the MODEM RTS is turned ON or OFF, respectively. |
D3 | Bit B1 A of the MODEM stays OFF. |
D4 | Bit RX of the MODEM stays OFF. |
D5 | The MODEM fails to complete the command transmission sequence. |
D6 | No MODEM interrupt for 60 seconds. |
E1 | Microprocessor MPU error on the control panel PCB. |
E4 | Out of recording paper. |
E5 | Recording paper set error. |
E6 | Write error in E2PROM. |
FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE
RETURN TO WORLD OF FAX HOME PAGE