World of
Fax & Copiers
Fax, Copier & Printer
Parts/Supplies Specialist
We Stock full line of parts for Sharp, Xerox, Canon, Brother, Hp, Toshiba, Panasonic, Ricoh
Outside
or within the U.S. (845) 624-2332
FAX ORDERS TO 845-624-2299
COMMON ERROR CODES FOR THE:
FAX
900
CODE | DESCRIPTION |
82 | Recording paper feeding error. |
83 | Recording paper jam at the leading edge of paper. |
84 | Recording paper jam at the trailing edge of paper. |
85 | Ribbon empty detected. |
86 | Near end of ribbon detected. |
87 | Fails to complete the sequence of recording operation. |
88 | Recording paper jam. |
89 | Cutter jam. |
8A | Wrong or weak contact of the recording head connectors. |
8B | Recording head overheat. |
8D | DMA error during recording operation. |
91 | Paper empty sensor output too low. |
92 | Paper empty sensor output too high. |
93 | Paper empty sensor output unstable. |
95 | Insufficient difference in output levels of paper empty sensor for black and white. |
A1 | Control panel assembly opened. |
A2 | Document too long to scan. |
A3 | No document detected by the rear document sensor during copying. |
A4 | Faulty white level data. |
A5 | Faulty operation of DMAO during scanning |
A6 | Faulty operation of DMA1 during scanning |
A7 | One-line feeding time-out error. |
A8 | One-line scanning time-out error. |
BB | Scanning error: The right-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected.) |
BC | Scanning error: Reduction miss. |
BD | Scanning error: Enlargement miss. |
D1 | The MODEM setup bit sticks to High. |
D2 | CTS stays OFF or ON if the MODEM RTS is turned ON or OFF, respectively. |
D3 | Bit B1 A of the MODEM stays OFF. |
D4 | Bit RX of the MODEM stays OFF. |
D5 | The MODEM fails to complete the command transmission sequence. |
E1 | Microprocessor (MPU) error on the control panel FOB. |
E4 | Out of recording paper. |
E5 | Recording paper set error. |
E6 | Writer error in E2PROM. |
E8 | Data scanning error during transmission. |
EA | No document detected by the rear document sensor during sending operation.) |
F3 | Voice message recording or playing-back not started. |
F4 | CNG detector adjustment error. |