Call the World of Fax Order Hotline at 1-866-FAX-PART for Helpful Order Assistance!!!

      RETURN TO WORLD OF FAX MAIN PAGE

COMMON ERROR CODES FOR THE:

MFC 8300 Brother Error / Troubleshooting Codes    MFC 8300

CODE DESCRIPTION
71 Laser scanner motor does not lock.
72 Cannot detect Beam Detect signal.
73 No toner cartridge loaded.
74 Toner empty.
75 In-house temperature error.  -

SOLUTION: REPLACE FUSER UNIT
76 Fixing heater harness disconnected or broken.  -

SOLUTION: REPLACE FUSER UNIT
77 Heater thermistor short circuit.  -

SOLUTION: REPLACE FUSER UNIT
78 Heater thermistor harness disconnected or broken.  -

SOLUTION: REPLACE FUSER UNIT
79 Toner thermistor disconnected or broken.  -

SOLUTION: REPLACE FUSER UNIT
7A Main motor locked
7B ASIC error on the main PCB
7C Engine PCB error
80 Paper size setting error. Document too long to scan.
82 Paper feeding error. Document too long to scan.
83 Paper jam. The registration sensor remains ON.
84 Ejection sensor still stays OFF.
85 No paper cassette loaded
86 No 2nd paper cassette loaded
88 Paper jam. Even after the registration sensor has gone OFF, the paper ejection sensor still stays OFF.
A1 Top cover opened.
A2 Document too long to scan.
A3 Document not detected by the document rear sensor.
A4 50% or more faulty of white level data.
A7 One-line feeding time-out error.
A8 One-line scanning time-out error.
A9 Abnormal scanning reference voltage
AC Less than 50% faulty of white level data
B7 A/D converter reference voltage error (at High Level)
B8 A/D converter reference voltage error (at Low Level)
B9 Light Emission intensity error of the LED array
BA Magnification error for substantial white level data
BB Substantial white level data error in black & white mode
BC Substantial white level data error in Photo mode
BD Black Level data error
D5 The MODEM fails to complete the command transmission sequence.
E4 Out of recording paper.
E6 Write error in EEPROM.
E8 Data scanning error during transmission.
EA Document removed at phase B.
F3 Voice message recording or playing-back not started.
F5 EOL not found in page memory transmission mode.
F6 PC interface error.

FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE

Return to Brother Fax Parts, Brother Intellafax Part, Brother Fax Machine Part, Brother Fax Supplies, Brother Fax Fuser Unit, Brother Fax Manuals, Brother Fax Repairs, Brother Drums, Brother Fax 1150MC, Brother Fax 1170, Brother Fax 1250 MC, Brother Fax 1270, Brother Fax 1350 MC, Brother Fax 1450 MC, Brother Fax 1550 MC, Brother Fax 1570, Brother Fax 1800C, Brother Fax 2300 ML, Brother Fax 2400 ML, Brother Fax 2500 ML, Brother Fax 2600, Brother Fax 2750, Brother Fax 2800, Brother Fax 2900, Brother Fax 3500 ML, Brother Fax 3550, Brother Fax 3650, Brother Fax 3750, Brother Fax 3800, Brother Fax 4100, Brother Fax 4750, Brother Fax 4750e, Brother Fax 5750, Brother Fax 5750e, Brother MFC 1750 MC, Brother MFC 1770, Brother MFC 1850 MC, Brother MFC 1950 MC, Brother MFC 1970, Brother MFC 3100C, Brother MFC 4000 ML, Brother MFC 4350, Brother MFC 4400 ML, Brother MFC 4450, Brother MFC 4500 ML, Brother MFC 4550, Brother MFC 4600, Brother MFC 4650, Brother MFC 4800, Brother MFC 5100C, Brother MFC 5500 ML, Brother MFC 5550 ML, Brother MFC 6800, Brother MFC 7000C, Brother MFC 7050C, Brother MFC 7150C, Brother MFC 7160C, Brother MFC 7200C, Brother MFC 7300C, Brother MFC 7400C, Brother MFC 7550, Brother MFC 7650, Brother MFC 7750, Brother MFC 8300, Brother MFC 8500, Brother MFC 8600, Brother MFC 8700, Brother MFC 9700, Brother MFC 9800, Brother DCP 1000, Brother DCP 1200, Brother DCP 1400, Brother Fax Parts, Brother Intellafax Part main page                        

RETURN TO WORLD OF FAX HOME PAGE