World of
Fax & Copiers
Fax, Copier & Printer
Parts/Supplies Specialist
We Stock full line of parts for Sharp, Xerox, Canon, Brother, Hp, Toshiba, Panasonic, Ricoh
Outside
or within the U.S. (845) 624-2332
FAX ORDERS TO 845-624-2299
COMMON ERROR CODES FOR THE:
MFC
8700
| CODE | DESCRIPTION |
| 71 | Laser scanner motor does not lock. |
| 72 | Cannot detect Beam Detect signal. |
| 73 | No toner cartridge loaded. |
| 74 | Toner empty. |
| 75 | In-house temperature error.
-
SOLUTION: REPLACE FUSER UNIT |
| 76 | Fixing heater harness disconnected or broken.
-
SOLUTION: REPLACE FUSER UNIT |
| 77 | Heater thermistor short circuit.
-
SOLUTION: REPLACE FUSER UNIT |
| 78 | Heater thermistor
harness disconnected or broken.
-
SOLUTION: REPLACE FUSER UNIT |
| 79 | Toner thermistor
disconnected or broken.
-
SOLUTION: REPLACE FUSER UNIT |
| 7A | Main motor locked |
| 7B | ASIC error on the main PCB |
| 7C | Engine PCB error |
| 80 | Paper size setting error. Document too long to scan. |
| 82 | Paper feeding error. Document too long to scan. |
| 83 | Paper jam. The registration sensor remains ON. |
| 84 | Ejection sensor still stays OFF. |
| 85 | No paper cassette loaded |
| 86 | No 2nd paper cassette loaded |
| 88 | Paper jam. Even after the registration sensor has gone OFF, the paper ejection sensor still stays OFF. |
| A1 | Top cover opened. |
| A2 | Document too long to scan. |
| A3 | Document not detected by the document rear sensor. |
| A4 | 50% or more faulty of white level data. |
| A7 | One-line feeding time-out error. |
| A8 | One-line scanning time-out error. |
| A9 | Abnormal scanning reference voltage |
| AC | Less than 50% faulty of white level data |
| B7 | A/D converter reference voltage error (at High Level) |
| B8 | A/D converter reference voltage error (at Low Level) |
| B9 | Light Emission intensity error of the LED array |
| BA | Magnification error for substantial white level data |
| BB | Substantial white level data error in black & white mode |
| BC | Substantial white level data error in Photo mode |
| BD | Black Level data error |
| D5 | The MODEM fails to complete the command transmission sequence. |
| E4 | Out of recording paper. |
| E6 | Write error in EEPROM. |
| E8 | Data scanning error during transmission. |
| EA | Document removed at phase B. |
| F3 | Voice message recording or playing-back not started. |
| F5 | EOL not found in page memory transmission mode. |
| F6 | PC interface error. |