MFC
9700 World of
Fax & Copiers
Fax, Copier & Printer
Parts/Supplies Specialist
We Stock full line of parts for Sharp, Xerox, Canon, Brother, Hp, Toshiba, Panasonic, Ricoh
Outside
or within the U.S. (845) 624-2332
FAX ORDERS TO 845-624-2299
COMMON ERROR CODES FOR THE:
MFC
9700
| CODE | DESCRIPTION |
| (71 | Polygon motor does not synchronize with the reference clock. ) |
| (72 | Cannot detect Beam Detect signal. ) |
| (73 | No toner cartridge loaded. ) |
| (74 | Toner empty. ) |
| (75 | In-casing temperature error. ) -
SOLUTION: REPLACE FUSER UNIT |
| (76 | Heater harness disconnected or broken. )
-
SOLUTION: REPLACE FUSER UNIT |
| (77 | Heater thermistor short circuit.) -
SOLUTION: REPLACE FUSER UNIT |
| (78 | Heater thermistor harness disconnected or broken. )
-
SOLUTION: REPLACE FUSER UNIT |
| (79 | In-casing temperature sensor harness disconnected or broken. )
-
SOLUTION: REPLACE FUSER UNIT |
| (7A | Main motor does not synchronize with the reference clock. ) |
| (7B | ASIC error on the main PCS. ) |
| (7C | Engine PCB error. ) |
| (80 | Paper size setting error. ) |
| (82 | Paper feeding error. ) |
| (83 | Paper jam. The registration sensor, 2nd registration sensor, and/or manual insertion sensor remains ON.) |
| (84 | Paper jam. The paper ejection sensor remains ON. ) |
| (85 | No paper cassette loaded. ) |
| (86 | No 2nd paper cassette loaded. ) |
| (88 | Paper jam. Even after the registration sensor has gone OFF, the paper ejection sensor still stays OFF.) |
| (A1 | Front cover opened. ) |
| (A2 | Document too long to scan. ) |
| (A3 | Document not detected by the document rear sensor. ) |
| (A4 | 50% or more faulty of white level data. ) |
| (A7 | One-line feeding timeout error. ) |
| (A8 | One-line scanning timeout error. ) |
| (A9 | Abnormal scanning reference voltage. ) |
| (AC | Less than 50% faulty of white level data. ) |
| (AE | The CCD HP sensor sticks to OFF, indicating that the CCD unit has not returned home position. ) to the |
| (AF | The CCD HP sensor sticks to ON, indicating that the CCD unit has stayed in the position. ) home |
| (B1 | Dark level offset data error. ) |
| (B2 | Gain control data error. ) |
| (B3 | Scan area left edge detection error. ) |
| (B4 | Scan area right edge detection error. ) |
| (B7 | A/D converter reference voltage error (at High level). ) |
| (B8 | A/D converter reference voltage error (at Low level). ) |
| (BA | Magnification error for substantial white level data. ) |
| (BB | Substantial white level data error in black & white mode. ) |
| (BC | Substantial white level data error in photo mode. ) |
| (BD | Black level data error. ) |
| (BE | Detection error of black mark. ) |
| (BF | Detection error of ADF scanning position. ) |
| (D5 | The MODEM fails to complete the command transmission sequence. ) |
| (E4 | Out of recording paper. ) |
| E6 | Write error in EEPROM. |
***Error codes in parentheses do not appear as a "MACHINE ERROR XX", since these errors are displayed as text messages on the LCD. These error codes may be displayed in the maintenance mode using "Function Code 82".***