World of Fax & Copiers
Fax, Copier & Printer Parts/Supplies Specialist

 We Stock full line of parts for Sharp, Xerox, Canon, Brother, Hp,  Toshiba, Panasonic, Ricoh 

     Outside or within the U.S. (845) 624-2332
 
  
Toll Free 1-866-FAX-PART (866-329-7278)

FAX ORDERS TO 845-624-2299

COMMON ERROR CODES FOR THE:

    

CODE DESCRIPTION
(71 Polygon motor does not synchronize with the reference clock. ) 
(72 Cannot detect Beam Detect signal. ) 
(73 No toner cartridge loaded. ) 
(74 Toner empty. ) 
(75 In-casing temperature error. )  -

SOLUTION: REPLACE FUSER UNIT  

(76 Heater harness disconnected or broken. )  -

SOLUTION: REPLACE FUSER UNIT 

(77 Heater thermistor short circuit.)  -

SOLUTION: REPLACE FUSER UNIT

(78 Heater thermistor harness disconnected or broken. )  -

SOLUTION: REPLACE FUSER UNIT

(79 In-casing temperature sensor harness disconnected or broken. )  -

SOLUTION: REPLACE FUSER UNIT

(7A Main motor does not synchronize with the reference clock. ) 
(7B ASIC error on the main PCB. ) 
(7C Engine PCB error. ) 
(80 Paper size setting error. ) 
(82 Paper feeding error. ) 
(83 Paper jam. The registration sensor, 2nd registration sensor, and/or manual insertion sensor remains ON.) 
(84 Paper jam. The paper ejection sensor remains ON. ) 
(85 No paper cassette loaded. ) 
(86 No 2nd paper cassette loaded. ) 
(88 Paper jam. Even after the registration sensor has gone OFF, the paper ejection sensor still stays OFF.) 
(A1 Front cover opened. ) 
(A2 Document too long to scan. ) 
(A3 Document not detected by the document rear sensor. ) 
(A4 50% or more faulty of white level data. ) 
(A7 One-line feeding timeout error. ) 
(A8 One-line scanning timeout error. ) 
(A9 Abnormal scanning reference voltage. ) 
(AC Less than 50% faulty of white level data, j 
(AE The CCD HP sensor sticks to OFF, indicating that the CCD unit has not returned home position. ) to the
(AF The CCD HP sensor sticks to ON, indicating that the CCD unit has stayed in the position. ) home
(B1 Dark level offset data error. ) 
(B2 Gain control data error. ) 
(B3 Scan area left edge detection error. ) 
(B4 Scan area right edge detection error. ) 
(B7 A/D converter reference voltage error (at High level). ) 
(B8 A/D converter reference voltage error (at Low level). ) 
(BA Magnification error for substantial white level data. ) 
(BB Substantial white level data error in black & white mode. ) 
(BC Substantial white level data error in photo mode. ) 
(BD Black level data error. ) 
(BE Detection error of black mark. ) 
(BF Detection error of ADF scanning position. ) 
(D5 The MODEM fails to complete the command transmission seguence. ) 
(E4 Out of recording paper. ) 
E6 Write error in EEPROM. 

***Error codes in parentheses do not appear as a "MACHINE ERROR XX", since these errors are displayed as text messages on the LCD. These error codes may be displayed in the maintenance mode using "Function Code 82".***

FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE

Return tomain page

RETURN TO WORLD OF FAX HOME PAGE