Call the World of Fax Order Hotline at 1-866-FAX-PART (1-866-329-7278) for Helpful Order Assistance!!!
CLICK HERE TO RETURN TO THE WORLD OF FAX MAIN PAGE TO VIEW ALL OF OUR PRODUCTS
COMMON ERROR CODES FOR THE:
FAX 1270
CODE | DESCRIPTION |
82 | Recording paper feeding error |
87 | Fails to complete the sequence of recording operation |
8A | Wrong or weak contact of the recording head connections |
8B | Recording head overheat |
A1 | Recording paper cover opened |
A2 | Document to long to scan |
A3 | Document not detected by the document rear sensor |
A4 | 50% or more faulty of white level data |
A5 | Faulty operation of DMAO during scanning |
A6 | Faulty operation of DMA1 during scanning |
A7 | One-line feeding time-out error |
A8 | One-line scanning time-out error |
A9 | Abnormal scanning reference voltage |
AB | Document feed-in amount measuring error |
AC | Less than 50% faulty of white level data |
B1 | CODEC LSI error |
B9 | Light emission intensity error of the LED array |
BA | Scanning error: The left-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected |
BB | Scanning error: The right-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected |
BC | Scanning error: Reduction miss |
BD | Scanning error: Enlargement miss |
BE | Abnormal clamp PWM value |
D1 | The MODEM setup bit sticks to High |
D2 | CTS stays OFF or ON. If the MODEM RTS is turned ON or OFF, respectively |
D3 | Bit B1 A of the MODEM stays OFF |
D4 | Bit RX of the MODEM stays OFF |
D5 | The MODEM fails to complete the command transmission sequence |
D6 | No MODEM interrupt for 60 seconds |
E1 | Microprocessor MPU error on the control panel |
E4 | Out of recording paper |
E5 | Recording paper set error |
E6 | Write error in E2PROM |
E8 | Data scanning error during transmission |
EA | Document removed at phase B |
F3 | Voice message recording or playing-back not started |
F5 | EOL not found in page memory transmission mode |