Call the World of Fax Order Hotline at 1-866-FAX-PART for Helpful Order Assistance!!!
RETURN TO WORLD OF FAX MAIN PAGE
COMMON ERROR CODES FOR THE:
MFC 4350
CODE | DESCRIPTION |
71 | Laser scanner motor does not lock. |
72 | Cannot detect Beam Detect signal. |
73 | No toner cartridge loaded. |
74 | Toner empty. |
75 | In-house temperature error. -
SOLUTION: REPLACE FUSER UNIT |
76 | In-house temperature error. -
SOLUTION: REPLACE FUSER UNIT |
77 | In-house temperature error. -
SOLUTION: REPLACE FUSER UNIT |
78 | Heater thermistor harness disconnected or broken.
-
SOLUTION: REPLACE FUSER UNIT |
79 | Toner thermistor disconnected or broken.
-
SOLUTION: REPLACE FUSER UNIT |
80 | Paper size setting error. Document too long to scan. |
82 | Paper feeding error. Document too long to scan. |
83 | Paper jam. The registration sensor remains ON. |
84 | Ejection sensor still stays OFF. |
88 | Paper jam. Even after the registration sensor has gone OFF, the paper ejection sensor still stays OFF. |
A1 | Top cover opened. |
A2 | Document too long to scan. |
A3 | Document not detected by the document rear sensor. |
A4 | 50% or more faulty of white level data. |
A7 | One-line feeding time-out error. |
B9 | Light emission intensity error of the LED array. |
D5 | The MODEM fails to complete the command transmission sequence. |
E4 | Out of recording paper. |
E6 | Write error in EEPROM. |
E8 | Data scanning error during transmission. |
EA | Document removed at phase B. |
F3 | Voice message recording or playing-back not started. |
F5 | EOL not found in page memory transmission mode. |
F6 | PC interface error. |